Application

• Secondary waste Fibres to get quality de-fibred pulp.
• Wet Strength or laminated papers.
• Virgin pulp. Or sack kraft
• Batch operation at consistency 12 - 20 % depending on the type of furnish.

Features 

• Rotor Mounted on bearing M.S.Body and Belt Drive System with flat pulleys.
• Bearing M.S.body is bolted with vat.
• Vat is supported on 3 to 4 legs.
• VAT Contains 3 nos to 4 nos. baffles and bottom shaped for optimum circulation.
• Discharge plate hole is equipped with pneumatic pulp valve.

Advantages

• High Reduction in pulping time due to hot water pulping.78 degree temp.
• Less power consumption in comparision with traditional pulping ( 30 KWH/ton ).
• No Cutting of contaminents of any kind.
• Low residual flake contents.
• Better fibrillation with minimum fiber damage
• Low residual stickies contents.